Detail Information For Child Restraint Systems Installation - Toyota Corolla Hybrid 2020 Owner's Manual

Includes a top tether anchorage
point.
Never use a rear-facing child
restraint system on the front
passenger seat.
*1
: Move the front seat fully rearward. If
the passenger seat height can be
adjusted, move it to the upper most
position.
*2
: Adjust the seatback angle to the
most upright position. When install-
ing a forward-facing child seat, if
there is a gap between the child seat
and the seatback, adjust the
seatback angle until good contact is
achieved.
■

Detail information for child restraint systems installation

Seat position number
Seating position suitable
for universal belted
(Yes/No)
i-Size seating position
(Yes/No)
Seating position suitable
for lateral fixture
(L1/L2/No)
Suitable rearward facing
(R1/R2X/R2/R3/No)
Suitable forward facing
fixture (F2X/F2/F3/No)
Suitable junior seat fixture
(B2/B3/No)
ISOFIX child restraint systems are divided into different "fixture". The child
restraint system can be used in the seating positions for "fixture" mentioned
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
Seating position
Yes
Forward fac-
ing only
No
No
fixture No
No
No
1-2. Child safety
*3
: If the head restraint interferes with
your child restraint system, and the
head restraint can be removed,
remove the head restraint.
Otherwise, put the head restraint in
the upper most position.
*4
: Use only a front-facing child restraint
system.
Yes Yes
Yes No
No No
R1, R2X, R2 No
F2X, F2, F3 No
B2, B3 No
57
1
Yes
Yes
No
R1, R2X, R2
F2X, F2, F3
B2, B3