Toyota Corolla Hybrid 2020 Owner's Manual page 246

244
4-5. Using the driving support systems
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: Increases or
decreases in 5 km/h (3.1 mph)
mph (8 km/h)
as the switch is held
In the constant speed control mode
(P.245), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: The speed will con-
tinue to change while the switch is held.
*1
: When the set speed is shown in
"km/h"
*2
: When the set speed is shown in
"MPH"
Changing the vehi-
cle-to-vehicle distance (vehi-
cle-to-vehicle distance
control mode)
Pressing the switch changes the
vehicle-to-vehicle distance as fol-
lows:
1
Long
2
Medium
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
*2
each time the
*1
or 5
*2
increments for as long
*1
*2
each time the
3
Short
The vehicle-to-vehicle distance is set
automatically to long mode when the
power switch is turned to ON.
If a vehicle is running ahead of you, the
preceding vehicle mark
displayed.
Vehicle-to-vehicle distance
settings (vehicle-to-vehicle
distance control mode)
Select a distance from the table
below. Note that the distances
shown correspond to a vehicle
speed of 80 km/h (50 mph). Vehi-
cle-to-vehicle distance
increases/decreases in accord-
ance with vehicle speed.
Distance Vehicle-to-vehicle dis-
options
Approximately 50 m (160
Long
Approximately 40 m (130
Medium
Approximately 30 m (100
Short
will also be
tance
ft.)
ft.)
ft.)