press the "SEEK >" or "< TRACK"
button to move up or down to select
the desired file.
■
Fast-forwarding and rewinding
files
Press and hold the "SEEK >" or "<
TRACK" button until you hear a
beep.
■
Random play
Pressing
modes in the following order:
Folder randomDisc randomOff
■
Repeat play
Pressing
in the following order: File
repeatFolder repeat
*
: Available except when "RDM" (ran-
dom play) is selected
■
Switching the display
Press
the album title.
If there are continuing texts,
played.
Press and hold
hear a beep to display the remaining
texts.
■
Display
Depending on the contents recorded,
the characters may not be displayed
properly or may not be displayed at all.
■
Error messages
If an error message is displayed, refer to
the following table and take the appro-
priate measures. If the problem is not
rectified, take the vehicle to your Toyota
dealer.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
5-4. Playing an audio CD and MP3/WMA discs
(RDM) changes
(RPT) changes modes
*
Off
(TEXT) to display or hide
is dis-
(TEXT) until you
Cause/Correction
Message
The disc may be
dirty, damaged or
inserted
"CD CHECK"
upside-down.
Clean the disc or
insert it correctly.
There is a trouble
inside the system.
"ERROR 3"
Eject the disc.
An over current
error has occurred.
"ERROR 4"
Turn the power
switch off.
Operation has
stopped due to a
high temperature
inside the player.
Wait for a while
"WAIT"
and then press the
"MODE" button. If
the CD still cannot
be played back,
contact your
Toyota dealer.
This indicates that
the MP3, WMA or
"NO SUPPORT"
AAC file is not
included in the CD.
■
Discs that can be used
Discs with the marks shown below can
be used.
Playback may not be possible depend-
ing on recording format or disc features,
or due to scratches, dirt or deterioration.
289
procedures
5