Table of Contents
Advertisement
and the head restraint can be
removed, remove the head
restraint.
Otherwise, put the head
restraint in the upper most posi-
tion. (P.144)
3
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Securely fix the seat belt to the
child restraint system in accord-
ance to the directions enclosed
with the child restraint system.
4
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature),
secure the child restraint system
using a locking clip.
5
After installing the child restraint
system, rock it back and forth to
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
1-2. Child safety
ensure that it is installed
securely. (P.67)
■
Removing a child restraint
system installed with a seat
belt
Press the buckle release button
and fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to
the rebound of the seat cushion.
Release the buckle while holding down
the child restraint system.
Since the seat belt automatically reels
itself, slowly return it to the stowing
position.
■
When installing a child restraint
system
You may need a locking clip to install the
child restraint system. Follow the
instructions provided by the manufac-
turer of the system. If your child restraint
system does not provide a locking clip,
you can purchase the following item
from your Toyota dealer: Locking clip for
child restraint system
(Part No. 73119-22010)
WARNING
■
When installing a child restraint
system
Observe the following precautions.
Failure to do so may result in death or
serious injury.
Do not allow children to play with
●
the seat belt. If the seat belt
becomes twisted around a child's
neck, it may lead to choking or
other serious injuries that could
result in death. If this occurs and
the buckle cannot be unfastened,
scissors should be used to cut the
belt.
67
1
Advertisement
Table of Contents
