Setting The Vehicle Speed - Toyota Corolla Hybrid 2020 Owner's Manual

Setting the vehicle speed

1
Press the cruise control main
switch to activate the cruise con-
trol.
Cruise control indicator will come on.
Press the switch again to deactivate the
cruise control.
2
Accelerate or decelerate the
vehicle to the desired speed,
and press the "-SET" switch to
set the speed.
Cruise control "SET" indicator and set
speed will be displayed on the
multi-information display.
The vehicle speed at the moment the
switch is released becomes the set
speed.
Adjusting the set speed
To change the set speed, press the
"+RES" or "-SET" switch until the
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
4-5. Using the driving support systems
desired set speed is obtained.
1
Increases the speed
2
Decreases the speed
Fine adjustment: Press the switch in
the desired direction.
Large adjustment: Press and hold
switch.
The set speed will be increased or
decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: The set speed can
be increased or decreased continually
until the switch is released.
*1
: When the set speed is shown in
"km/h"
*2
: When the set speed is shown in
"MPH"
249
*1
*2
each time the
4