Toyota Corolla Hybrid 2020 Owner's Manual page 302

300
5-5. Using an external device
Message
"USB ERROR"
"ERROR 3"
"ERROR 4"
"ERROR 5"
"NO MUSIC"
"Hubs are not sup-
ported"
■
USB memory
Compatible devices
●
USB memory that can be used for MP3,
WMA and AAC playback
Compatible device formats
●
The following device formats can be
used:
• USB communication formats: USB2.0
FS (12mbps)
• File formats: FAT16/32 (Windows)
• Correspondence class: Mass storage
class
MP3, WMA and AAC files written in any
format other than those listed above
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
may not play correctly, and their file
Cause/Correction
names and folder names may not be
procedures
displayed correctly.
This indicates that
Items related to standards and limita-
the data in the
tions are as follows:
USB memory can-
• Maximum directory hierarchy: 8 levels
not be read.
• Maximum number of folders in a
This indicates that
the USB memory
• Maximum number of files in a device:
may be malfunc-
tioning.
• Maximum number of files per folder:
This indicates that
●
an over current
MP3 (MPEG Audio LAYER3) is a stan-
error has occurred.
dard audio compression format.
This indicates that
Files can be compressed to approxi-
the USB memory
mately 1/10 of their original size by
communication
using MP3 compression.
error has occurred.
WMA (Windows Media Audio) is a
This indicates that
Microsoft audio compression format.
no
This format compresses audio data to a
MP3/WMA/AAC
size smaller than that of the MP3 format.
files are included
AAC is short for Advanced Audio Cod-
on the USB mem-
ing and refers to an audio compression
ory device.
technology standard used with MPEG2
This indicates that
and MPEG4.
the hub connect
There is a limit to the MP3, WMA and
error occurs.
AAC file standards and to the media/for-
mats recorded by them that can be
used.
●
• Compatible standards MP3
(MPEG1 LAYER3, MPEG2 LSF LAY-
ER3)
• Compatible sampling frequencies
MPEG1 LAYER3: 32, 44.1, 48 (kHz)
MPEG2 LSF LAYER3: 16, 22.05, 24
(kHz)
• Compatible bit rates (compatible with
MPEG1 LAYER3: 32-320 (kbps)
MPEG2 LSF LAYER3: 8-160 (kbps)
(including the root)
device: 3000
9999
255
MP3, WMA and AAC files
MP3 file compatibility
VBR)