Table of Contents
Advertisement
Power windows
3-5.Opening and closing the windows
Opening and closing the
power windows
The power windows can be opened
and closed using the switches.
Operating the switch moves the
windows as follows:
1
Closing
2
One-touch closing
3
Opening
4
One-touch opening
*
: To stop the window partway, operate
the switch in the opposite direction.
■
The power windows can be oper-
ated when
The power switch is in ON.
■
Operating the power windows after
turning the hybrid system off
The power windows can be operated for
approximately 45 seconds after the
power switch is turned to ACC or OFF.
They cannot, however, be operated
once either front door is opened.
■
Jam protection function
If an object becomes jammed between
the window and the window frame while
the window is closing, window move-
ment is stopped and the window is
opened slightly.
COROLLA HV_ 国瑞 _GE
COROLLA HYBRID_OM_General_OM12M44E
3-5. Opening and closing the windows
■
Catch protection function
If an object becomes caught between
the door and window while the window
is opening, window movement is
stopped.
■
When the window cannot be
opened or closed
When the jam protection function or
catch protection function operates unu-
sually and the door window cannot be
opened or closed, perform the following
operations with the power window
switch of that door.
Stop the vehicle. With the power
●
switch in ON, within 4 seconds of the
jam protection function or catch pro-
tection function activating, continu-
ously operate the power window
switch in the one-touch closing direc-
tion or one-touch opening direction so
that the door window can be opened
and closed.
If the door window cannot be opened
●
and closed even when performing the
*
above operations, perform the follow-
ing procedure for function initializa-
tion.
*
1
Turn the power switch to ON.
2
Pull and hold the power window
switch in the one-touch closing
direction and completely close the
door window.
3
Release the power window switch
for a moment, resume pulling the
switch in the one-touch closing
direction, and hold it there for
approximately 6 seconds or more.
4
Press and hold the power window
switch in the one-touch opening
direction. After the door window is
completely opened, continue holding
the switch for an additional 1 second
or more.
5
Release the power window switch
for a moment, resume pushing the
switch in the one-touch opening
direction, and hold it there for
approximately 4 seconds or more.
6
Pull and hold the power window
switch in the one-touch closing
151
3
Advertisement
Table of Contents
