Safety Program And F-Runtime Group - Siemens SINAMICS Startdrive Getting Started

Safety Integrated
9.5 Commissioning extended functions
9.5.7

Safety program and F-runtime group

Security program
To use the safety functions of the SINAMICS drive device in conjunction with an F-CPU, you
must create the safety programs. For each F-peripheral of the SIMATIC S7-1500F CPU, an
F-block with the associated instance DB and an F-runtime group are created automatically
during the configuring so that you can begin immediately with programming the safety
program.
To display the F-runtime group, proceed as follows:
1. Click "Safety Administration" below the SIMATIC CPU in the project navigation. In the
working area, you can use the secondary navigation to access the individual functions of
the Safety Administration.
Figure 9-18
82
Safety Administration for SIMATIC CPU
Getting Started - SINAMICS Startdrive
Getting Started, 01/2015