Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
Figure 2
Inner Cover Removal
Step 4. Remove the Front Panel Assembly
Refer to
1. With a 5/16-in wrench, remove all front panel jumpers (item
2. With a T-10 TORX driver, remove the screws (item
Before removing the front panel from the analyzer, lift and support the
front of the analyzer chassis.
3. Slide the front panel over the test port connectors.
Installation Note N5242-90003
Figure 3
for this step of the procedure.
frame.
①
).
➁
) from the sides of the
13
Advertisement
