Advertisement
Description of the Upgrade
Getting Prepared
Tools Required for the Installation
Description
T-10 TORX driver (set to 9 in-lbs)
T-20 TORX driver (set to 21 in-lbs)
5/16-in torque wrench (set to 10 in-lbs)
5/16-in torque wrench (set to 21 in-lbs)
Use a 5/16-in torque wrench set to 10 in-lbs on all cable connections
except the front and rear panel cable connectors. Torque these
connections to 21 in-lb.
About Installing the Upgrade
Products affected
Installation to be performed by
Estimated installation time
Estimated adjustment time
Estimated full instrument calibration time
Installation Note N5242-90003
N5241A, N5242A and N5249A Option 219
Keysight service center or personnel qualified by Keysight
5.0 hours
0.5 hours
4.5 hours
Qty
Part Number
1
N/A
1
N/A
1
N/A
1
N/A
7
Advertisement
