Ricoh Russian-C2a Service Manual page 310

Table of Contents

Advertisement

CHECKING ITEMS USING RSS
1.3.2 AUTO CALL AND READ ITEMS
SC Calls
The SC calls are generated according to the SC level as follows. Please note that
the SC levels of this copier are defined differently from other copiers.
SC Level
Fusing unit SCs which cannot be reset
A
by customer.
SCs that disable only the features which
B
use the defective item.
SCs that are not shown on the
C
operation panel.
SCs caused by incorrect sensor
D
detection; these can be reset by turning
the main power switch off and on.
CC Manual Calls
The CC manual call may be generated by the customer, when "1: New Mode" is
selected with SP5-508-4 (the default is "1"). There are two types of CC manual
calls as follows.
CC Code
When the number of jams specified by SP5-508-12 are detected
consecutively:
a). When "0:Auto Call" is selected with SP5-508-22, CC101 will be
Manual Call:
b). When "1: Manual Call" is selected with SP5-508-22, the Manual call key
CC 101
The default setting of SP5-508-22 is "1: Manual Call".
When in a paper jam or an original jam condition and a cover is open for
longer than the time specified by SP5-508-13, one of the following will occur
after all doors are closed.
a). When "0: Auto Call" is selected with SP5-508-23, CC202 will be
Manual Call:
b). When "1: Manual Call" is selected with SP5-508-23, the Manual call key
CC 202
The default setting of SP5-508-23 is "1: Manual Call".
Definition
generated automatically.
appears on the LCD. Upon pressing the key, a "Manual Call: CC101" is
generated immediately. "Manual Call:CC101" will be listed as an MC in
the Call List screen of the Concorde system, and "Manual Call:CC101"
will be indicated in the "Symptom" column of the call detail screen.
generated automatically.
appears on the LCD. Upon pressing the key, a "Manual Call: CC202" is
generated immediately. "Manual Call:CC202" will be listed as an MC in
the Call List screen of the Concorde system, and "Manual Call:CC202"
will be indicated in the "Symptom" column of the call detail screen.
APPENDIX-4
SC Auto Call Condition
An SC call is generated
immediately
An SC call is generated when the
SC occurs two times within 10
copies.
An SC call is not generated.
An SC call is generated when the
SC occurs two times within 10
copies.
Definition
9 November, 2001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents