Ricoh Russian-C2a Service Manual page 178

10 August, 2001
1
Mode Number/Name
911* 5 Middle Size
(Optional PFU)
4th Paper Amount
6 Small Size
(Optional PFU)
7 Middle Size
(Optional PFU)
4th Paper Size
8 4th Small Paper Size
Setting
(Optional PFU)
9 4th Middle Paper Size
Setting
(Optional PFU)
912* Tray Motor Reverse Time
Function/[Setting]
Adjusts the upper paper lift motor forward rotation time
for paper sizes larger than the small size threshold set
with SP1-911-8, up to and including the middle size
threshold set with SP1-911-9.
The motor rotates forward when the remaining paper
amount is lower than the value of SP1-911-7.
If a middle size threshold is not stored with SP1-911-9,
this SP is not used.
Use this SP when a paper feed problem occurs when
paper in the 4th paper tray is running low.
See "Optional Paper Tray Unit - Paper Lift Mechanism"
for details on SP1-911.
[0 ~ 2000 / 300 / 1 ms/step]
Selects the remaining paper amount limit for use with
SP1-911-4.
Set this SP to 2 or 3 when a paper feed problem
occurs before near-end.
See "Optional Paper Tray Unit - Paper Lift Mechanism"
for details on SP1-911.
[0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%]
Selects the remaining paper amount limit for use with
SP1-911-5.
Set this SP to 2 or 3 when a paper feed problem
occurs before near-end.
See "Optional Paper Tray Unit - Paper Lift Mechanism"
for details on SP1-911.
[0 = None (Empty) / 1 = Near End / 2 = 25% / 3 = 75%]
Selects the small size threshold for the 4th paper tray.
"0" means that this setting is not used.
The size used by SP1-911 is determined by paper
width. See "Optional Paper Tray Unit - Paper Lift
Mechanism" for details on SP1-911.
[0 = None (Not used) / 1 = HLT/A5 / 2 = A4 / 3 = LT / 4
= DLT / 5 = A3]
Selects the middle size threshold for the upper tray.
"0" means that this setting is not used.
The value must be larger than the small size threshold
(SP1-911-8). The size used by SP1-911 is determined
by paper width. See "Optional Paper Tray Unit - Paper
Lift Mechanism" for details on SP1-911.
[0 = None (Not used) / 1 = HLT/A5 / 2 = A4 / 3 = LT /
4 = DLT / 5 = A3]
Adjusts the tray motor reverse time.
The tray motor reverses when the tray is pulled out.
The tray can be put back in the machine without
damage while the motor reverses.
[0 ~ 9000 / 1700 / 1 ms/step]
4-15
SERVICE PROGRAM MODE