Ricoh Russian-C2a Service Manual page 301

10 August, 2001
7.3 PAPER FEED TROUBLESHOOTING
When a paper double feed or paper non feed problem occurs, fix the problem in
accordance with the following flow chart.
Paper Feed Problem
Non Feed Double Feed
Small Paper Size?
Reduce the bottom plate
pressure for normal paper size.
Change the value of the
following SP mode to a larger
number.
SP No.
1-908-1
1-909-1
1-910-1
1-911-1
Small Paper Size?
Apply the bottom plate pressure
for normal paper size.
Change the value of the
following SP mode to a smaller
number.
SP No.
1-908-1
1-909-1
1-910-1
1-911-1
Yes
(A5/HLT)
No
Reduce the bottom plate
pressure for small paper size.
Change the value of the
following SP mode to a larger
number.
Tray
1st Tray 1-908-2
2nd Tray 1-909-2
3rd Tray 1-910-2
4th Tray 1-911-2
Yes
(A5/HLT)
No
Apply the bottom plate pressure
for small paper size.
Change the value of the
following SP mode to a smaller
number.
Tray
1st Tray 1-908-2
2nd Tray 1-909-2
3rd Tray 1-910-2
4th Tray 1-911-2
7-15
PAPER FEED TROUBLESHOOTING
SP No. Tray
1st Tray
2nd Tray
3rd Tray
4th Tray
Feed problem Yes
occurs at paper
Note
*
near-end?
No
SP No. Tray
1st Tray
2nd Tray
3rd Tray
4th Tray
*
Note:
If the feed problem
always occurs at a
certain point before
near-end, change the
remaining paper
threshold with
SP 1-908-6, 1-909-6,
1-910-6, and/or
1-911-6
Apply the bottom plate pressure
at near-end condition for small
paper size.
Change the value of the
following SP mode to a larger
number.
SP No. Tray
1-908-4 1st Tray
1-909-4 2nd Tray
1-910-4 3rd Tray
1-911-4 4th Tray
B027T500.WMF