Ricoh Russian-C2a Service Manual page 199

SERVICE PROGRAM MODE
5
Mode Number/Name
801 4 IMH (Image Memory
Handler)
MCS (Memory Control
5
Service)
6 Copier application
7 Fax application
8 Printer application
9 Scanner application
10 Network application
11 NCS (Network Control
Service)
12 R-FAX
802 Free Run
803 Input Check
804 Output Check
807* Option Connection Check
1 ARDF
2 Bank (Paper Tray Unit)
LCT
3
4 Finisher (1000-sheet,
Two-Tray finisher)
810 SC Code Reset
1 Fusing SC
811 Serial Number Input
Function/[Setting]
Initializes the registration setting for the image
memory handler.
Initializes the automatic delete time setting for stored
documents.
Initializes all copier application settings.
Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and the off-hook
timer.
Initializes the printer defaults, programs registered,
the printer SP bit switches, and printer CSS counter.
Initializes the scanner defaults for the scanner and
all the scanner SP modes.
Deletes the network file application management
files and thumbnails, and initializes the job login ID.
Initializes the system defaults and interface settings
(IP addresses also), SmartNetMonitor for Admin,
WebStatusMonitor settings, and the TELNET
settings.
Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
Performs a free run for both the scanner and the
printer.
After selecting "1", press "OK" or the ' key twice to
start this feature. Press the & (Clear/Stop) key to stop.
[0 = No / 1 = Yes]
Displays signals received from sensors and switches.
Press the " (Clear Modes) key to exit the program.
(☛ 4.2.4)
Turns on electrical components individually for test
purposes. (☛ 4.2.5)
Checks the connectors to the optional peripheral
devices. Execution will return either a "1" or "0":
1: Device connected correctly.
0: Device not connected correctly.
Resets all level A service call conditions, such as fusing
errors. DFU
To clear the service call, touch "Execute" on the LCD,
then turn the main power switch off/on.
Use to input the machine serial number. (This is
normally done at the factory.)
This serial number will be printed on the SMC report.
4-36
10 August, 2001