Ricoh Russian-C2a Service Manual page 117

COPIER INSTALLATION
[A]
12. If the optional bridge unit will not be installed: Swing the sensor feeler [A]
out.
13. Install the optional ARDF or the optional platen cover (see ARDF Installation or
Platen Cover Installation).
14. Plug in the machine and turn the main power switch on. The machine
automatically performs TD sensor initial setting (approximately
15. Check the copy quality and copying functions.
16. Initialize the electrical total counter using SP7-825, depending on the service
contract type.
HDD Caution Decal (for only –17, -57 models)
1. When installing the optional HDD, attach the HDD caution decal [B] to the front
cover.
B022I105.WMF
[B]
3-10
10 August, 2001
B027I105.WMF
15 seconds).