Ricoh Russian-C2a Service Manual page 198

10 August, 2001
5
Mode Number/Name
508* CC Call
1 Remain of Jam
(Unattended Jam)
2 Continuous Jam
Occurrence
3 Continuous Door Open
4 New CC Call Mode
11 Time for Remain of
Jam
12 Number of continuos
Jam
13 Time of Continuous
Door Open
21 Remain of Jam Mode
(Unattended Jam)
22 Continuous Jam
Occurrence Mode
23 Continuous Door Open
Mode
801 Memory All Clear
1 All modules
2 Engine
3 SCS (System Control
Service)/SRAM
Function/[Setting]
Switches the control call on/off for an unattended jam.
Japan only DFU
0: Off, 1: On
If you select "1", the alarm sound if a jam is left
unattended for 15 minutes.
Switches the control call on/off for the occurrence of
consecutive jams. Japan only DFU
0: Off, 1: On
If you select "1", the alarm will sound if 5 consecutive
jams occur in the copier.
Switches the control call on/off for the cover open
alarm. Japan only DFU
0: Off, 1: On
If you select "1", the alarm will sound if the door
remains open for 15 minutes.
Selects whether or not the new CC call.
Japan only DFU
0: Previous Mode, 1: New Mode
This SP is effective when the value of SP5-508-4 is "1".
Japan only DFU
[3 ~ 30 / 10 / 1 min/step]
This SP is effective when the value of SP5-508-4 is "1".
Japan only DFU
[2 ~ 10 / 5 / 1 time/step]
This SP is effective when the value of SP5-508-4 is "1".
Japan only DFU
[3 ~ 30 / 10 / 1 min/step]
This SP is effective when the value of SP5-508-4 is "1".
Japan only DFU
0: Auto Call, 1: Alarm
This SP is effective when the value of SP5-508-4 is "1".
Japan only DFU
0: Auto Call, 1: Alarm
This SP is effective when the value of SP5-508-4 is "1".
Japan only DFU
0: Auto Call, 1: Alarm
Resets all correction data for process control and all
software counters, and returns all modes and
adjustments to their default values. (☛ 4.2.7).
To execute, hold down # for over 3 seconds, and then
turn the copier off and on again.
Use this SP only after replacing the NVRAM, or after
the copier has malfunctioned due to a damaged
NVRAM.
Initializes items 2 ~ 12 below.
Initializes all registration settings for the engine and
processing settings.
Initializes default system settings, CSS settings,
operation display coordinates, and ROM update
information.
SCS: System Control Service
4-35
SERVICE PROGRAM MODE