Table of Contents
Advertisement
Attaching the
Quick Dial
Sheet
1.
Unpack the Quick Dial sheet, then remove
the cover sheet from the Quick Dial keys.
2.
Holding the Quick Dial sheet so that the
QWERTY layout faces up, fit the sheet over
the Quick Dial keys. Then affix the cover
sheet over the Quick Dial sheet.
Insert the tabs on either side of the Quick
Dial Cover into the slots on the machine.
Reference
T Upon shipment from the factory, this machine's
Quick Dial keys are arranged in a QWERTY layout.
3
Please use the QWERTY layout while doing the
setup procedure. If desired, you may then change
to the QWERTZ, AZERT, or ABC layout. To change
the layout, see Chapter 7, "Key Layout" in the
Advanced Features manual.
Note
T Remove the glossy plastic coating sheets from the
display and other surfaces.
Printed Matters
H5358671_A4.pm6
3
Attaching the
Trays And Docu-
ment Table
3
The machine has three types of trays. Please
carefully refer to the illustrations when attaching
them. Make sure that the frosted side faces up.
1.
Remove the trays and document table from
their shipping bags.
2.
Attach the Print Delivery Tray. Insert it at an
angle so that the tabs fit in the slots pro-
vided.
3.
Hold the Document Delivery Tray at the
points indicated by the circles in the
illustration, then attach it to the fax
machine. Attach the Document Delivery
Tray.
4
4.
Attach the Document Table.
ZCKS120E
Keep going...
00.12.8, 10:29 AM
ZCKS130E
ZCKS140E
Advertisement
Table of Contents
