Ricoh Fax 2100L Operating Instructions Manual page 8

16.
Use the number keys to enter your fax
number as it must be dialed from outside of
your country. (You cannot enter pauses.)
Fax Number OK
+4401234567890
Note
T The format of the number is normally as follows:
International Dial Prefix, your Country Code, your
Area Code, followed by your telephone number.
Check the International Dialing Prefix and the
Country Code with your local telecommunications
operator.
17.
Press the [OK] key.
"Initial Setup Completed" will flash briefly
in the display.
Ready 100% 04:55
Set Orig./ Enter No.
7
After Initial Settings
You can check and adjust these settings.
T To change the Language, see Chapter 6, "Selecting
the Display Language" in the Advanced Features
manual (CD-ROM).
T To change the Country Code, see Chapter 7,
"Country" in the Advanced Features manual (CD-
ROM).
T To change the date and time, see Chapter 6, "Setting
the Date and Time" in the Advanced Features
manual (CD-ROM).
T To change the line type, see Chapter 7, "Line Type"
in the Advanced Features manual (CD-ROM).
T To change your own name, fax header, and fax
number settings, see Chapter 3, "Initial Settings and
Adjustments" in the Basic Features manual.
Reference
TSee Chapter 10, "Installation" in the Advanced
Features manual (CD-ROM) for further information
regarding installation.
Printed Matters
H5358671_A4.pm6 7
Please keep this manual and any leftover
parts in a safe place.
00.12.8, 10:29 AM
That's it!
Printed in The Netherlands
EE GB H535-8671