Routes - Simrad NSO evo3S MPU Operator's Manual

38
Delete a waypoint
You can delete a waypoint from the edit waypoint dialog or by selecting the delete menu
option when the waypoint is activated.
You can also delete waypoints from the waypoints tool on the home page.
You can delete MOB waypoints the same way.
Waypoint alarm settings
You can set an alarm radius for each individual waypoint you create. The alarm is set in the
Edit Waypoint dialog.
Ú Note:
The waypoint radius alarm must be toggled ON in the alarm dialog to activate an
alarm when your vessel comes within the defined radius. For more information, refer to
"Alarm dialogs" on page 133.

Routes

About routes
A route consists of a series of routepoints entered in the order that you want to navigate
them.
When you select a route on the chart panel it turns green, and the route name is displayed.
Creating a new route on the chart panel
1.
Activate the cursor on the chart panel
2.
Select the new route option from the menu
3.
Position the first waypoint on the chart panel
4.
Continue positioning new routepoints on the chart panel until the route is completed
5.
Save the route by selecting the save option in the menu.
Edit a route from the chart panel
1.
Select the route to make it active
2.
Select the route edit option in the menu
3.
Position the new routepoint on the chart panel:
- If you set the new routepoint on a leg, a new point is added between existing
routepoints
- If you set the new routepoint outside the route, the new routepoint is added after the
last point in the route
4.
Drag a routepoint to move it to a new position
5.
Save the route by selecting the save option in the menu.
Ú Note:
The menu changes depending on the selected edit option. All edits are confirmed
or cancelled from the menu.
Creating routes using existing waypoints
A new route can be created by combining existing waypoints from the Routes dialog. The
dialog is activated by using the Waypoints tool on the Home page and then selecting the
Routes tab.
Creating a route based on a trip
You can create a route based on a historical trip. Select a trip in the TripIntel history dialog
and then the create route option.
Converting tracks to routes
You can convert a track to a route from the edit track dialog. The dialog is activated by
activating the track, and then:
• Selecting the track's pop-up
• Selecting the track in the menu
Waypoints, routes, and tracks | NSO evo3S MPU Operator Manual