Evinrude Engine Integration; Fusion-Link Integration; Bep Czone Integration - Simrad NSO evo3S MPU Operator's Manual

Evinrude engine integration

If an Evinrude engine control head is available on the NMEA 2000 network, the Evinrude
engines can be monitored and controlled from the unit.
When the feature is also enabled in the advanced settings features dialog:
• An Evinrude icon is added to the home page - select it to display the engine instrument
panel.
You can customize which data is displayed on the instrument panel. Refer to "Instruments"
on page 114.
• An Evinrude settings dialog is added - use this dialog to change engine settings.
• An Evinrude button is added to the control bar - selecting this button opens the engine
controller. Use the engine controller to control the engines.
A maximum of two control heads and four engines is supported.
For more information, refer to the engine manual or engine supplier.

FUSION-Link integration

Compatible FUSION-Link devices connected to the system can be controlled from the
system.
The FUSION-Link devices appear as additional sources when using the audio function. No
additional icons are available.
Refer to "Audio" on page 118 for more information.

BEP CZone integration

The unit integrates with BEP's CZone system used for controlling and monitoring a
distributed power system on your vessel.
The CZone icon is available in the toolbar on the Home page when a CZone system is
available on the network.
A separate manual is provided with your CZone system. Refer to this documentation and to
the unit's Installation manual for how to install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone dashboard is added to the
instrument panels.
You switch between a panel's dashboards by swiping left or right on the panel or by
selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for each of the gauges.
Available editing options depend on the type of gauge and which data sources that are
connected to your system.
For more information, refer to "Instruments" on page 114.
Integration of 3 party devices| NSO evo3S MPU Operator Manual
143