CAN bootloader
Figure 51. Readout Unprotect command via CAN: device side
1. RDU_PRM = Readout Unprotect.
The STM32F105xx and STM32F107xx sends the messages as follows:
ACK message: Std ID = 0x92, DLC = 1, data[0] = ACK if the content of the command is
correct and ROP is not active else data[0] = NACK.
66/83
Doc ID 14156 Rev 1
AN2662
Need help?
Do you have a question about the STM32F105 Series and is the answer not in the manual?