Disconnecting the SCSI Option Board Ribbon Cables
Disconnecting the SCSI Option Board Ribbon Cables
To access some of the components beneath the large inside cover,
Summary
you must disconnect the SCSI option board ribbon cables. This
section describes how to complete this task.
Important
Information
Disconnection
Table 10–2 lists the steps that you must follow to disconnect both
Procedure
SCSI option board ribbon cables.
Table 10–2 Disconnecting the SCSI Option Board Ribbon
Step
1
2
3
10–4 Installing, Moving, or Removing Option Boards
Static electricity can damage electronic components.
Use an antistatic wrist strap while handling these
components (see Appendix B).
Cables
Action
If necessary, remove the system unit covers following
the procedure described in Chapter 9.
Disconnect the larger ribbon cable ( ) and place it out
of your way.
Disconnect the smaller ribbon cable ( ) and place it
out of your way.
Caution