Installation; Installation Conditions - FPZ SCL K05 MS-MOR Instructions Manual

12 INSTALLATION

12.1 INSTALLATION CONDITIONS

Make sure the conditions of use as described in section 3 are complied with, then proceed with installation of the machine as specified
below.
Make sure to always have the installed unit under control when carrying out any operation in the installation area.
The control elements must be placed so that the installed unit can be seen.
Danger of serious injury!
.
•
The unit's support surface must be flat, sturdy,
stable and as level as possible.
ENERGOEKONOM spol. s r.o., Wolkerova 433, CZ-250 82 Úvaly, Czech Republic, Tel.: +420 281 981 055, info@energoekonom.cz, www.energoekonom.cz
Danger due to limited visibility in the place where the unit is installed!
37 / 100
ATTENTION!
Lifting the unit in any way
other than that indicated is
strictly prohibited. Use the
special lugs on the body of the
blower, motor or base