Graco 15V963 Instructions Manual page 67

The option card appeared in the communication tree.
Select the Profibus Interface and click the Edit button to
select a driver. Click OK to pick the Profibus DP driver.
F . 60.
IG
F . 60: Select Profibus Server
IG
Graco Gateway now displays the driver settings where
the Station Address can be changed. This address is
the Gateway address on the Profibus network. In our
example, this address is 5 as setup in the PLC earlier.
F . 61: Block Settings
IG
312785B
Appendix B: Profibus
NOTE: There are no Baud Rate settings as the Profibus
option card detects the transmission rate automatically.
A device called PLC1 is now displayed under the Profi-
bus Interface. This device represents the Profibus Mas-
ter and can be renamed to fit the application. In this
example, the name PLC1 remains. F
™
DP Slave Communication
. 61.
IG
67