Hardware - Graco 15V963 Instructions Manual

Hardware

To use DeviceNet on the Gateway, an option card must
first be installed. The option card provides the hardware
necessary to support the CAN physical layer specifica-
tion as required by the DeviceNet standard.
Configuring the option card is a two-stage process; first
the option card must be selected in Gateway (DeviceNet
Option Card), and then the 'DeviceNet Predefined
Group 2 Server Driver' configured to run on the newly
created DeviceNet Interface port.
Gateway Configuration
The following example requires use of an Allen Bradley
1756-ControlLogix PLC, along with RSLogix 5000 and
RSNetWorx for DeviceNet software and a Gateway.
F . 31: Select DeviceNet Option Card
IG
312785B
Appendix A: DeviceNet
Configure the Gateway DeviceNet Option
Card
Install the Gateway DN0000 option card in the Gateway
as per the provided instructions.
Click on File>New to create a new Gateway database
and select Gateway Series HMI – Gateway 10.
Enter the Communications section. In the tree on the
left, select Gateway from the top of the tree. Select the
Edit button at the right, and select the DeviceNet Option
Card from the dialog box as shown in F
™
Slave Communication
. 31. Click OK.
IG
45