Led Functions - Graco 15V963 Instructions Manual

Troubleshooting

LED Functions

Status (STS) LED
The green Status LED provides information on the sta-
tus of the Graco Gateway, including various stages of
the startup routine and any errors that occur.
Status Indication
Rapidly Graco Gateway is currently running the
Flashing boot loader and/or being upgraded.
Steady Graco Gateway is operating normally.
User Communication Ports - TX/RX LEDs
Status Indication
Green Transmitting
Red Receiving
Ethernet LEDs
Status Indication
Yellow Link Established
(Steady)
Yellow Network Activity
(Flashing)
Green 10 BASE-T Communications
Amber 10 BASE-TX Communications
38
CompactFlash (CF) LED
Status Indication
Off No CompactFlash card is present.
Steady Valid CompactFlash card is present.
Rapidly CompactFlash card is being checked.
Flashing
Flickering Unit is writing to the CompactFlash
card, either to store data or because the
PC connected via the USB port has
locked the drive.*
Slowly Incorrectly formatted CompactFlash
Flashing card is present.
* Do not turn off power to the unit while this light is
flickering. The unit writes data in two minute inter-
vals. Later Microsoft operating systems will not lock
the drive unless they need to writer data; Windows
98 may lock the drive any time it is mounted, thereby
interfering with logging. Contact Graco Technical
Assistance for further information.
312785B