Appendix B: Profibus
Overview
This appendix describes the Gateway's support for Pro-
fibus DP and details the configuration steps necessary
to set up a Graco Gateway with an S7300 PLC,
CPU315-2DP via Profibus. It does not provide a
detailed description of Profibus, but only a brief introduc-
tion, necessary to define the terms that are used
throughout the remainder of this document.
Introduction
Profibus DP stands for "Profibus for Decentralized
Peripherals". Profibus DP is a device level bus that sup-
ports both analog and discrete signals. It has wide-
spread usage for such items as remote I/O systems,
motor control centers, and variable speed drives. Profi-
bus DP communicates at speeds from 9.6 Kbps to 12
Mbps over distances from 100 to 1,200 meters.
Profibus Option
F
. 47: Profibus PLC Connection
IG
312785B
™
DP Slave Communication
Card
Appendix B: Profibus
The protocol supported by the Profibus DP option card
is Profibus DP Slave. Therefore, the Graco Gateway
must be linked to a Profibus network with a PLC.
Profibus Port Protocols
The Profibus option card has one Profibus port. See
F
. 47.
IG
Also see Appendix B: Profibus
cation on page 57.
PLC Connection
™
DP Slave Communication
™
DP Slave Communi-
TI13964a
57