Setup The Database - Graco 15V963 Instructions Manual

Graco Gateway Network Communications Configuration

Setup the Database

1. Double-click on the Communications button to open
the preconfigured database (.gg2). The file is
already setup for ProMix 2KS. See F
F . 18: Preconfigured Database
IG
2. See F . 19. Highlight Protocol 1. Click the Edit but-
IG
ton on the right side of the window to open the
Driver Picker window. Choose a protocol from the
F . 19: Select Protocol
IG
16
. 18.
IG
lists provided, in this example Modbus and TCP/IP
Slave. The system will create device PLC1.
312785B