Map Data - Graco 15V963 Instructions Manual

Graco Gateway Network Communications Configuration

Map Data

1. See F . 22. Select the block for data mapping. Click
IG
the Edit button next to the Start Address field on the
right side of the window. The Select Address win-
dow will open.
F . 22: Mapping Gateway Blocks
IG
18
2. Refer to Table 4 on page 30 for a Modbus map.
Select the desired Modbus register address as a
starting point (in this case 40002). Enter the appro-
priate values in the Select Address window and click
OK. The desired register address will populate the
Start Address field.
312785B