Adjusting Hand And Day Indicator Alignment; Phone Finder; Configuring Watch Settings; Changing The Home City Summer Time Setting - Casio 5604 Operation Manual

3.
Y Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
Before swapping After swapping
Home City (Tokyo)
Home City (New York)
World Time City
(New York)
World Time City
(Tokyo)
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use EDIFICE Connected
to adjust them.
1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Operation Guide 5604

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
This will cause the watch to enter the
Calendar Mode.
Connected
2.
X Hold down (B) for at least four seconds
until the second hand points to e .
A connection will be established between
the watch and phone, and then the
phone's ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
3.
X Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.

Configuring Watch Settings

You can use EDIFICE Connected to specify
the amount of time until the Bluetooth
connection is automatically terminated, and to
configure other settings.
1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Disconnected
Changing the Home City
Summer Time Setting
1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to change your Home City
summer time setting.
9