Setting The Alarm; Configuring World Time Settings - Casio 5604 Operation Manual

Setting the Alarm

1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to configure alarm time
settings.
Configuring World Time
Settings
Specifying a World Time City with EDIFICE
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
EDIFICE Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
Operation Guide 5604
Selecting a World Time City
●
1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
World Time hour (24-hour)
World Time hour and minute
Configuring the Summer Time Setting
●
1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
Changing the time setting manually
●
with a watch operation will cancel auto
standard time/summer time switching.
EDIFICE Connected screen shows
●
information about summer time
periods.
Swapping Your World Time and Home
●
Time
1.
Y Tap the "EDIFICE Connected" icon.
2.
X Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
8