Configuring Alarm Settings; Turning Off The Alarm; Resetting Watch Settings - Casio 5604 Operation Manual

Configuring Alarm Settings

The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
●
below.
When battery power is low
ー
When watch is at Level 2 power saving
ー
Power Saving
l
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o'clock, and the function hand to move
to [DT].
Function hand
2.
Press (A).
This causes the function hand to move to
[ALM] and turns on the alarm.
3.
Rotate the crown to change the alarm time
setting.
Check the 24-hour hand to see if it is
●
indicating a.m. or p.m. for the alarm
time.
Alarm on
4.
Push the crown back in.
To stop the alarm
●
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
A beeper sounds for 10 seconds when
●
an alarm time is reached.
You can also use EDIFICE Connected
●
to configure alarm time settings.
Operation Guide 5604

Turning Off the Alarm

If you leave the alarm turned on, it will sound
every day at the preset alarm time.
To stop the alarm from sounding, perform the
steps below to turn it off.
To have the alarm sound again, turn it on.
●
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o'clock, and the function hand to move
to [DT].
Crown
2.
Press (A).
This causes the function hand to move to
[ALM] and turns on the alarm.
3.
Press (B) to move the second hand to off.
Each press of (B) toggles between on
●
and off.
Minutes
Hours
Alarm on
4.
Push the crown back in.
＋
−
Crown
Crown
Function hand
Second hand
Alarm off

Resetting Watch Settings

This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Stopwatch
●
Alarm
●
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Pull out the crown to the second click.
This causes the second hand to move to
12 o'clock.
3.
Hold down (A) for at least 10 seconds until
the second hand performs one full
rotation.
Second hand
4.
Push the crown back in.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Crown
13