Table of Contents
Advertisement
Configuring World Time
Settings
Specifying a World Time City with OCEANUS
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
OCEANUS Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
Selecting a World Time City
●
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
30
World Time hour and minute
World Time hour (24-hour)
Watch Operation Guide 5652
Configuring the Summer Time Setting
●
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to select a summer time
setting.
"Auto"
●
The watch switches between standard
time and summer time automatically.
"OFF"
●
The watch always indicates standard
time.
"ON"
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
"Auto", the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch's summer time setting as "Auto".
Changing the time setting manually
●
with a watch operation will cancel auto
standard time/summer time switching.
OCEANUS Connected screen shows
●
information about summer time
periods.
Swapping Your World Time and Home
●
Time
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
Before swapping
After swapping
Home City
(Tokyo)
30
World Time City
World Time City
(New York)
Note
Auto time adjustment does not work for
●
24 hours after swapping of the Home
Time and World Time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use OCEANUS
Connected to adjust them.
1. Y
Tap the "OCEANUS Connected" icon.
2. X
Hold down (C) for at least 3.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Note
The movement of some hands are
●
linked with other hands. When
correcting the alignment of such a
hand, you will have to correct the
alignment of the linked hand(s) at the
same time.
Home City
(New York)
30
(Tokyo)
10
Advertisement
Table of Contents
