Triggering Immediate Time Correction
●
The watch's time setting will be corrected
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
correction, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (A) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand performs one revolution
and then points to [C] again. Next, the
watch's time setting is adjusted.
At this time your current location is
●
recorded by your phone.
The connection is terminated
●
automatically after time correction is
complete.
Connected
After time correction
30
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time correction is
being performed, you can use the CASIO
WATCHES phone app to adjust them.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (A) for at least 2.5 seconds.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Watch Operation Guide 5728
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Phone finder will not sound the tone
●
unless the CASIO WATCHES phone
app is running on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press (A) to terminate the connection.
Connected
30
2. X
Hold down (A) for at least 5 seconds
until the second hand points to [C].
A connection will be established between
the watch and phone, and then the
phone's ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
3. X
Press (A) to stop the tone.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.
Disconnected
30
30
Configuring Watch Settings
You can use CASIO WATCHES to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (A) for at least 2.5 seconds.
This establishes a connection between
the watch and phone.
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the summer time
setting
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (A) for at least 2.5 seconds.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to change the summer time
setting.
10