Moving To Another Time Zone; Other Information; Summer Time Switching; Supported Phones - Casio 5604 Operation Manual

Table of Contents

Advertisement

Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
Before Boarding
1.
Configure the World Time (Dual Time)
setting to the current time at your
destination.
Current time
Destination time
Selecting a World Time City
l
2.
Disable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping
After swapping
Destination time
Destination time
Swapping Your World Time and Home
l
Time
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
3.
Adjust the time setting.
Triggering Immediate Time
l
Adjustment
Operation Guide 5604

Other Information

This section provides non-operational
information you also need to know. Refer to
this information as required.

Summer Time Switching

Connecting with a Phone to Switch
After the watch is connected with a phone,
summer time switching of Home City time and
World Time is performed in accordance with
the EDIFICE Connected setting (Auto/ON/
OFF) as described below.
Auto :
After the watch is connected with a phone,
summer time is displayed for the current
location time or World Time when it is within
the summer time period. Otherwise standard
time is displayed.
ON :
The watch always displays summer time.
OFF :
The watch always displays standard time.
Auto Summer Time Switching
When the watch is connected to a phone, it is
sent summer time period information for your
Home City. If there is a World Time City
specified with EDIFICE Connected,
information for that city will also be sent. If the
EDIFICE Connected summer time setting is
"Auto", the watch will keep track of the summer
time period and perform summer time
switching automatically, even if it is not
connected with the phone.

Supported Phones

For information about phones that can
connect with the watch, visit the CASIO
website.
https://world.casio.com/os_mobile/wat/

Specifications

Accuracy at normal temperature :
±15 seconds per month average when time
adjustment by communication with a phone is
not possible.
Timekeeping :
Hour, minute (10-second hand movement),
second, day, day of the week, Full Auto
Calendar (2000 to 2099)
Dual Time :
Hour, minute, 24-hour
Stopwatch :
Measuring unit: 1 second
Measuring capacity: 23:59'59" (24 hours)
Measurement Functions:
Normal elapsed time measurement,
flyback timing
Direct Start
Starts stopwatch elapsed time
measurement from the Calendar
Mode.
Alarm :
Setting units: Hours, minutes
Beeper: 10 seconds
Mobile Link :
Auto Time Correction
Time setting adjusted automatically at
preset time.
One-touch Time Correction
Manual connection and time adjustment
Phone finder
Watch operation sounds the alert sound
of the phone.
World Time
Current time for a selection of
approximately 300 cities
Home Time/World Time swapping
Auto summer time setting
Automatic switching between standard
time and summer time.
Alarm Settings
Hand alignment correction
Data Communication Specifications
Bluetooth
®
Frequency Band: 2400MHz to 2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)
Other :
Power Saving, Low Battery Alert
Power Supply :
Solar panel and one rechargeable battery
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents