Siemens SIMATIC Rack PC 840 Manual page 80

Configuring the SIMATIC Rack PC 840
Numlock
Key Click
Keyboard auto-repeat
rate
"Hardware Options" Field
The following submenu appears when you select the "Hardware Options" field in
the main menu:
Figure 5-7
The parameters of the interfaces present on the motherboard are set here.
Entry
PCI-MPI/DP *
On Board
Ethernet
Ethernet
Address
1
* Optional product feature
5-10
Switches Numlock on or off following power on. If "Auto" is set,
this will be remembered the next time the device is switched on.
A keystroke can be heard
Increase in automatic key repeat rate
PhoenixBIOS Setup Utility
Main
Hardware Options
[ Enabled
PCI – MPI / DP:
[Enabled]
Onboard Ethernet
08000624xxxx
Ethernet Address
LAN Remote Boot: [Disabled]
[Enabled]
SafeCard functions:
[Enabled]
Fan Control:
PS/2 Mouse:
[Enabled]
Help Select Item
F1
ESC Exit Select Menu
"Hardware Options" Submenu
1
Enables the CP5611-compatible MPI/DP interface. The resourses are
managed by the BIOS PCI Plug and Play mechanism.
The Ethernet port on the motherboard is enabled.
[Enabled]
The Ethernet port on the motherboard is disabled.
[Disabled]
The individual Ethernet address is entered here.
Item Specific Help
Enable or disable the
1)
]
PCI - Multi Point
Interface (MPI/DP)
+ / – Change Values F9
Select
Enter Sub-Menu F10
Meaning
SIMATIC Rack PC 840 Manual
Setup Defaults
Save and Exit
A5E00104826-03