Scsi Setup - Siemens SIMATIC Rack PC 840 Manual

Controller
8.1.1

SCSI Setup

The BIOS of the SCSI controller contains an SCSI Setup program controlled by
menu commands. This program allows you to select settings for the SCSI
controller and SCSI devices connected to it.
When the system starts up, an SCSI BIOS message appears with a list of the
SCSI devices connected.
Note
If an SCSI BIOS error message appears or problems with SCSI devices occur, read
the "Trouble with the SCSI Controller" and "SCSI BIOS Messages" sections.
Starting SCSI Setup
Start the device and press the key combination
S
following message appears on your screen:
Press <Ctrl> <A> for SCSI Select (TM) Utility!
The first menu of SCSI-Setup, Configure/View Host Adapter Settings and SCSI
Disk Utilities is displayed.
Using Keyboard Commands
Use the following keys to operate the program:
Esc
F2
F5
Note also the status bar at the bottom margin of the screen.
8-4
to select an entry
to confirm a selection
to call the previous menu and exit SCSI Setup.
to restore default settings
to toggle between black+white and color display
and when the
Ctrl
A
SIMATIC Rack PC 840 Manual
A5E00104826-03