An Error Message Appears On The Screen - Siemens SIMATIC Rack PC 840 Manual

6.6

An Error Message Appears on the Screen

Error Messages
The following table describes the error messages that the BIOS system outputs.
Error messages the operating system or program outputs are described in the
manuals for these programs.
Press <F2> to call Setup when booting the computer.
Error Message on the Screen
Address conflict
Combination not supported
IO device IRQ conflict
Invalid System Configuration
Data
Allocation Error for ...
System battery is dead
Replace and run SETUP
System CMOS checksum bad
Run SETUP
Incorrect Drive A type
Run SETUP
Incorrect Drive B type
Run SETUP
Diskette drive A error
Diskette drive B error
Failure Fixed Disk
Keyboard error
Stuck Key
System RAM Failed at offset:
Shadow RAM Failed at offset:
Extended RAM Failed at offset: Memory error
Failing Bits:
SIMATIC Rack PC 840 Manual
A5E00104826-03
Meaning/Suggestion
Plug and Play Problem
Contact your technical support team.
Plug and Play Problem
Contact your technical support team
Plug and Play Problem
Contact your technical support team
Plug and Play Problem
Please set the option RESET CONFIGURATION.DATA in the
Advanced Setup menu.
Contact your technical support team
Plug and Play Problem
Please undo the last hardware change.
Contact your technical support team
The battery on the CPU module is defective or dead.
Contact your technical support team
Call up SETUP, adjust settings and save. If this message appears
during each power up, contact your technical support team.
Check the SETUP entries for drive A.
Check the SETUP entries for drive B.
Error accessing drive A.
Contact your technical support team.
Error accessing drive B.
Contact your technical support team.
Error accessing the hard drive.
Check the SETUP settings
Contact your technical support team.
Check whether the keyboard is connected correctly.
Check whether a key on the keyboard is stuck.
Memory error
Contact your technical support team.
Memory error
Contact your technical support team
Contact your technical support team
Memory error
Contact your technical support team
Error Diagnosis
6-5