Table of Contents
Advertisement
DC-202 xDSL/Cable Broadband router
Top LEDs
WAN
LAN
On - Connection to
For each port, there are 2 LEDs
the modem attached
Link/Act
to the WAN (Internet)
port is established.
On - Corresponding LAN (hub)
port is active.
Flashing - Data is
being transmitted or
Off - No active connection on the
received via the WAN
corresponding LAN (hub) port.
port.
Flashing - Data is being trans-
mitted or received via the
corresponding LAN (hub) port.
100
On - Corresponding LAN (hub)
port is using 100BaseT.
Off - Corresponding LAN (hub)
port connection is using
10BaseT, or no active connec-
tion.
Power
Status (Red)
On - Power on.
On - Error
condition.
Off - No Power.
Off - Normal
operation.
Blinking - This
LED blinks
during start up.
9
Advertisement
Table of Contents
Need help?
Do you have a question about the DC-202 and is the answer not in the manual?
Questions and answers