Default Schedule Screen - Sitecom DC-202 Full Manual

• The "Del >>" button will remove the selected PC (in the Members list)
from the current group.
• The "<< Add" button will add the selected PC (in the Other PCs list) to
the current group.

Default Schedule Screen

This screen is displayed when the Define Schedule button on the Access
Control screen is clicked.
• This schedule can be (optionally) applied to any Access Control Group.
• Blocking will be performed during the scheduled time (between the
"Start" and "Finish" times.)
• Two (2) separate sessions or periods can be defined.
• Times must be entered using a 24 hr clock.
• If the time for a particular day is blank, no action will be performed.
Data - Default Schedule Screen
Day Each day of the week can scheduled independently.
Session 1 Two (2) separate sessions or periods can be defined.
Session 2 Session 2 can be left blank if not required.
PCs not assigned to any group will be in
the "Default" group.
PCs deleted from any other Group will be
added to the "Default" group.
DC-202 xDSL/Cable Broadband router
50