Table of Contents
Advertisement
If the list that appears on screen does not include a line, such as the one
that has been selected above ("TCP/IP -> network card"), then follow the
steps indicated below for adding this line:
•
Click on the button "Add"
•
Double-click on "Protocol"
•
Select "Microsoft" and thereafter "TCP/IP"
•
Click on "OK"
•
Wait a few seconds, so that TCP/IP can be added. Thereafter, click on
"OK" to leave the network properties screen. Restart your PC.
Select the line "TCP/IP -> Network card" as shown above. Click on the
button Properties to obtain a window similar to the following:
Check whether the setting "Obtain an IP address automatically" has
been selected, as is illustrated above. The DHCP server in the broadband
router will now assign an IP address to the PC.
DC-202 xDSL/Cable Broadband router
12
Advertisement
Table of Contents
Need help?
Do you have a question about the DC-202 and is the answer not in the manual?
Questions and answers