Table of Contents
Advertisement
DC-202 xDSL/Cable Broadband router
Start
Enter the start using a 24 hr clock.
Finish
Enter the finish time using a 24 hr clock.
Services Screen
This screen is displayed when the Edit Service List button on the Access
Control screen is clicked.
Data - Services Screen
Available Services
Available
This lists all the available services.
Services
"Delete" but-
Use this to delete any Service you have added. Pre-defined Services
can not be deleted.
ton
Add New Service
Name
Enter a descriptive name to identify this service.
Type
Select the protocol (TCP, UDP, ICMP) used to the remote system or
service.
Start Port
For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a single port num-
ber, enter it in both the "Start" and "Finish" fields.
Finish Port
For TCP and UDP Services, enter the end of the range of port num-
bers used by the service. If the service uses a single port number,
enter it in both the "Start" and "Finish" fields.
ICMP Type
For ICMP Services, enter the type number of the required service.
51
Advertisement
Table of Contents
Need help?
Do you have a question about the DC-202 and is the answer not in the manual?
Questions and answers