Macaddress; Mac Address Screen - Sitecom DC-202 Full Manual

DC-202 xDSL/Cable Broadband router
MAC Address
The MAC (hardware) address is a low-level network identifier. It may be
called "MAC Address", "Hardware Address", or "Physical Address". On a PC,
this address is associated with the Network card or adapter. The address
on the MAC Address screen is the address on the Internet (WAN port)
interface, and has no effect on the LAN interface.
• If your ISP asks for the Network Adapter Address, Physical Address,
Hardware Address, or MAC Address for the PC the DSL/Cable modem is
connected to, provide this value.
• If your ISP has already recorded a MAC Address, you can change the
address used by the DC-202 to match the address recorded by your
ISP.

MAC Address Screen

Select MAC Address from the Advanced menu to reach a screen like the
example below.
Data - MAC Address Screen

MACAddress

The current MAC (hardware) address is displayed.
If your ISP has recorded a Hardware Address, you can "spoof" that
address by entering it in the address field. The hardware address
consists of 12 characters, where each character is a digit (0..9) or a
character between A and F.
Buttons
Default Inserts the default MAC address into the MAC address field. You
must click "Save" to actually change the address used.
Copy from PC Inserts the MAC address from your PC into the MAC address field.
You must click "Save" to actually change the address used.
Save Save your changes to the DC-202.
Cancel Reverse any changes made since the last "Save".
73