Safety; Safety Definitions; General Safety Instructions; Symbols On The Product - Husqvarna 535iRXT Workshop Manual

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Apply a new warning label if a
warning symbol on the product is damaged or
missing.

2.3 Symbols on the product

WARNING! This product can be
dangerous! Careless or incorrect use can
result in serious or fatal injury to the
operator or others. It is extremely
important that you read and understand
the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before the product is
used.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Maximum speed of the output shaft.
/min
The product can cause objects to eject,
which can cause injury.
The product complies with the applicable
EU directives.
Keep a minimum distance of 15 m to
persons and animals during operation of
the product.

4 - Safety

2 Safety
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Only use a flexible cutting wire. Do not
use metal cutting elements.
Protected against splashing water.
Noise emissions to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Nosie Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility.
Direct current.
Keep all parts of your body away from the
hot surfaces.
If the product features wireless
technology. The symbol will be marked on
the product name label. Refer to
Technical data on page 32 .
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
The rating plate shows the serial num-
ber. yyyy is the production year, ww is
the production week and xxxxx is the
sequential number.
835 - 004 - 25.10.2019