Husqvarna 535iRXT Workshop Manual page 24

3. Attach the 2 screws.
4. Attach the battery connector and the 2 screws.
24 - Repair instructions
5. Attach the cable holder.
6. Attach the left half of the battery housing with the 4
screws.
7. Put the cable in the groove in the battery housing.
8. Install the control unit. Refer to
unit on page 14 .
9. Install the wear guard. Refer to
guard from the battery housing on page 22 .
To install the control
To remove the wear
835 - 004 - 25.10.2019