Husqvarna 535iRXT Workshop Manual page 26

5.5.2 To remove and install the vibration damping
unit (535iRXT/iRX)
1. Remove the 2 screws that hold the vibration
damping unit to the shaft.
2. Remove the 2 screws and the cover (A) of the
vibration damping unit.
26 - Repair instructions
B
A
3. Put a hex key through the holes in the springs and
remove the 2 springs (B).
4. Install in the opposite sequence.
835 - 004 - 25.10.2019