Husqvarna 535iRXT Workshop Manual page 20

3. Remove the strain relief (A) and carefully remove
the control cable from the clamps (B).
A
B
4. Lift out the user interface.
5. Disconnect the connector from the user interface.
a) If the product has a second control button,
disconnect the connector for that button.
20 - Repair instructions
B
5.2.5.2 To install the control cable
1. Connect the connector to the user interface.
a) If the product has a second control button,
connect the connector for that button.
2. Put the user interface into the control handle.
3. Carefully put the control cable in the groove below
the clamps (B). Attach the strain relief (A).
A
B
4. Assemble the power trigger and power trigger
To assemble the power trigger and
lockout. Refer to
power trigger lockout on page 19 .
5. Install the control handle. Refer to
and assemble the control handle on page 19 .
5.2.5.3 To remove the button for remote extension of the
trimmer line
CAUTION: Make a note of how the cables and
components are installed before you remove the
button for remote extension of the trimmer line.
B
To disassemble
835 - 004 - 25.10.2019