Husqvarna 535iRXT Workshop Manual page 18

5.2.3.4 To install the motor (535iRXT/iRX)
1. Attach the motor with the 3 screws.
2. Install the 2 rubber bushings and the shaft to the
motor housing.
3. Attach the shaft with the 2 screws.
18 - Repair instructions
4. Put the cable in the groove of the suspension and
the motor housing.
5. Put the wear protection into the hole and tilt it in the
direction of the shaft.
6. Attach the wear protection with 6 screws.
7. Install the harness loop.
835 - 004 - 25.10.2019