Firing With An Individual Program - Ivoclar Vivadent Programat P710 Operating Instructions Manual

Hide thumbs Also See for Programat P710:
Table of Contents

Advertisement

6. Practical Use

6.2 Firing with an individual program

Step 1:
Switching on
Switch on the furnace with the mains switch at the rear of the furnace.
The furnace conducts an automatic self-test.
Wait until the furnace has reached the set stand-by temperature.
Step 2:
Select the program
After the self-test, the display shows the home screen. Press the
[Individual programs] button.
Select the desired program group
Select the desired program
Step 3:
Entering the parameters
Enter the individual parameters and create the desired firing program
(See Chapter 5.2.3 for details).
74

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Programat cs3

Table of Contents