Firing With An Individual Program - Ivoclar Vivadent 747825BE Operating Instructions Manual

6. Practical Use

6.2 Firing with an individual program

Step 1:
Switch on
Switch on the furnace with the mains switch at the rear of the furnace.
The furnace conducts an automatic self-test.
Wait until the furnace has reached the set stand-by temperature.
Step 2:
Select the program
After the self-test, the display shows the home screen. Press the
[Individual Programs] button.
Select the desired program group.
Select the desired program.
Step 3:
Enter the parameters
Enter the individual parameters and create the desired firing program
(see Chapter 5.2.3 for details).
Step 4:
Load the furnace
Open the furnace head with the OPEN FURNACE HEAD key and
place the object on the firing tray in the furnace.
55
https://stomshop.pro